News

What's going on lately about ASTA and industry trends

Precautions for toner replacement

Precautions for toner replacement

1. The remaining powder in the powder feeding bin and powder receiving bin need to be cleaned up; 2. After applying the toner, shake the toner in the toner feeding bin in parallel, and turn the gear clockwise by hand several times to make the toner evenly adhere to the magnetic roller to ensure that […]

Read More
Tips for the use of laser printer

Tips for the use of laser printer

The laser printer has been warmed up for more than 2 minutes or the shape is not firm, and the text is off: 1.To consider whether the indoor temperature is above 20℃; 2.To check whether the thermistor has poor contact or failure; 3.To see if the voltage reaches 220V; 4.To see if the paper and […]

Read More
Why the printed text is light

Why the printed text is light

1. The printing paper is wet If the printing paper is damp, consider replacing it with dry paper and printing again. 2. Dirty or aging transfer roller If it is checked that the transfer roller is dirty, the transfer roller needs to be cleaned; if it is aging, the transfer roller needs to be replaced. […]

Read More
Why do blank pages appear after adding powder

Why do blank pages appear after adding powder

1. The toner cartridge is not in place After the toner is filled, the pins on both sides of the toner cartridge are not installed properly during the process of installing the toner cartridge, which will cause the toner cartridge to not be fully installed in place. We took out the toner cartridge from the […]

Read More
Why does the printer have horizontal leakage

Why does the printer have horizontal leakage

1. The photosensitive drum layer or drum gear is defective If the photosensitive drum layer or drum gear of the toner cartridge is defective, the toner cartridge is basically scrapped and can no longer be used. At this time, only a new toner cartridge can be replaced. 2. The magnetic roller cover, magnetic roller coating, […]

Read More
The paper appears completely white when printing

The paper appears completely white when printing

1. There is a problem with the scanner, mirror and transfer assembly Check the scanner, reflector and transfer components, and repair or replace them in time. 2. The protective cover is not opened, and the conductive steel sheet of the magnetic roller is not in contact with the conductive metal wire of the machine At […]

Read More
The paper appears completely black when printing

The paper appears completely black when printing

1. The corona wire is broken If the corona wire is broken, replace the corona wire. 2. Missing charging roller or poor assembly If the printing is completely black, it may be due to missing charging roller or improper assembly. This is usually caused by poor installation of the toner cartridge after manual removal. At […]

Read More
Paper cannot enter the printer

Paper cannot enter the printer

1. Check if the printing paper is wet Sometimes, if the printing paper is damp, the printing will not feed! At this time, dry paper needs to be replaced to print normally. 2. Check the printing paper loading position Check whether the loading position of the printing paper is correct and whether it exceeds the […]

Read More